Over flow box questions?
- Thread starter tscharf
- Start date
zennzzo;3504794; said:LOLOL
yeah, if you got Mad Pharaoh skilzzz...
I'm not so sure about that comment though. It might be a bit over stated.
i was thinking about doing some larger overflows ~1200g/hr and was thinking about buying
that one and then building my own from there ... figure i could copy it with little problem but then again .. i might just leak water all over my apt.
but i have been asking about this for the past 3 weeks and have not gotten a great answer ..
but i might have to drive to indy and kick pharaoh in the junk till he shows me how to diy as good as he does it
that one and then building my own from there ... figure i could copy it with little problem but then again .. i might just leak water all over my apt.
but i have been asking about this for the past 3 weeks and have not gotten a great answer ..
but i might have to drive to indy and kick pharaoh in the junk till he shows me how to diy as good as he does it
Iffrat;3508956; said:i was thinking about doing some larger overflows ~1200g/hr and was thinking about buying
that one and then building my own from there ... figure i could copy it with little problem but then again .. i might just leak water all over my apt.
but i have been asking about this for the past 3 weeks and have not gotten a great answer ..
but i might have to drive to indy and kick pharaoh in the junk till he shows me how to diy as good as he does it
Deny, Deny Deny!Really, if your going for DIY, cheap and effective.... then go for the specimen containers attached to each other. Get two U-tubes and a bulkhead or two. Then all you have to do is drill a couple holes and plumb it. All parts are available at Drs Foster & Smith. I was going to try it, but just never bought the parts to do so.
There is a DIY on here somewhere about it.
Pharaoh;3508979; said:
Really, if your going for DIY, cheap and effective.... then go for the specimen containers attached to each other. Get two U-tubes and a bulkhead or two. Then all you have to do is drill a couple holes and plumb it. All parts are available at Drs Foster & Smith. I was going to try it, but just never bought the parts to do so.
There is a DIY on here somewhere about it.
but im looking for the 1200g range .. you think i could do that with that method? and maybe you could link the parts your talking about so i have a better idea of what your talking about..
Something tells me if he's been asking for 3 weeks and hasn't got a good enough answer yet, we haven't been insisting on the SEARCH feature enough...
You should try searching for "DIY overflow".
You should try searching for "DIY overflow".
Iffrat;3509015; said:
Ask and you shall receive...
Specimen box/Fish Bagger (need two of the large ones)
http://www.drsfostersmith.com/product/prod_display.cfm?pcatid=15485
U-tubes (~600gph) x 2
http://www.drsfostersmith.com/product/prod_display.cfm?pcatid=4024
Bulkhead fitting (1" x 2) or (1.5" x 2)
http://www.drsfostersmith.com/product/prod_display.cfm?pcatid=4013
Found the DIY thread. Appears that it may not be too much cheaper. Oh, and apparently he changed his photobucket account, so no pics.
http://www.monsterfishkeepers.com/forums/showthread.php?t=163299&highlight=diy+specimen
http://www.monsterfishkeepers.com/forums/showthread.php?t=163299&highlight=diy+specimen
