Ow!
- Thread starter tommyd
- Start date
...and while you're at it, get a GFCI put on that power outlet! Honestly, a $20 malfunctioning heater, filter, or powerhead is not worth your life. It was stray voltage this time, but next time it could be full electrocution.
^ +1
The light isn't actually in the water is it? I'd suspect the powerhead or heater first, but if it went away when you unplugged the light, that must be it. A light shouldn't have a chance to leak voltage into the water though unless it's submerged. I'd definately check the wiring on the light to make sure there is no bare wire exposed.
The light isn't actually in the water is it? I'd suspect the powerhead or heater first, but if it went away when you unplugged the light, that must be it. A light shouldn't have a chance to leak voltage into the water though unless it's submerged. I'd definately check the wiring on the light to make sure there is no bare wire exposed.
No I'm not touching both light and water. And the charge came back. I suspect the powerhead is the culprit as well.
Might just be the powerhead then, and not the light. Powerhead cord might have been bumped when you unplugged the light. As mentioned the light shouldn't be electrifying the water unless it's touching the water, or touching something conductive that is in the water.
