paint

[fish meat]

what kind of spary paint should i use to spary the back of my tank. i was think about sparying the bottom too, any ideas/

 

[fish meat]

any body

 

[Bosa]

definitly one that will stick to glass, Krylon "Fusion" is a good one.

 

[beblondie]

I have used ACE spray enamel and it worked fine cost $1.00 a can I'm betting if your clever and have a decent hobby storearound theres a ton of different colors you could
use-Anne

 

[Fishermoe14]

when i did mine i used a brush with latex paint... works really good.. comes off nice and easy too... just gotta let each layer dry before putting on the next

 

[terd ferguson]

I used Lowes generic flat black spray paint and it came out awesome. Spray many thin coats rather than few heavy coats. Although drips won't show through the front. When you think you're done, shine a bright light from behind the tank and view it from the front. This will show any spots you missed where light can go through.

Why would you want to paint the bottom? Is it bare bottom?

 

[mick11]

I rolled mine on. Was cheaper and no fumes in the house. Find the cheap flat black paint at Home Depot or Lowes.

 

[ColdSpirit]

i just did this 3 days ago to my 150gallon, 2 cans was enough for mine. i went with krylon...lots of light coats. and defently use a light on the opposite side so you can see where you missed or didnt coat. good luck!

 

[slowpoke]

is it easy to take the krylon off if needed?

 

[japes]

Krylon Fusion.

If only it was commonly available over here, I can't find it anywhere, even online