Plastic fix?

  • We are currently upgrading MFK. thanks! -neo
Aquarium sealant could work since its not bad also could melt some plastic into the crack

Sent from my Comet using MonsterAquariaNetwork App
 
i just fixed a leak on my ac110 on the side, had a crack in it. I used aquarium silicone. Seems to have done the trick for now.
 
I used gel super glue to fix multiple small, fine cracks on an AC 30 and it is holding up well. You will just need to allow the repair to cure for 24 hours for best results. A thick rubber band or painters tape will work well as a clamp until the glue cures properly.
 
deeda said:
I used gel super glue to fix multiple small, fine cracks on an AC 30 and it is holding up well. You will just need to allow the repair to cure for 24 hours for best results. A thick rubber band or painters tape will work well as a clamp until the glue cures properly.
Click to expand...

Thats a good idea. are you sure the glue is aquarium safe?

Sent from my Comet using MonsterAquariaNetwork App
 
arow08 said:
I'm tryin duck tape haha bad idea it only slows down the drip lol


Sent from my iPhone using MonsterAquariaNetwork app
Click to expand...

Yeah you need to seal the crack you could leave the tape to give it a little extra strength

Sent from my Comet using MonsterAquariaNetwork App
 
Use acrylic solvent, try and find some weld-on.
 
It seems as though I see a lot of cases of the AC power filters cracking. This is pretty common I am assuming?
 
You must log in or register to reply here.
MonsterFishKeepers.com
Top Bottom