Plumbing UGJ's from Sump Questions

  • We are currently upgrading MFK. thanks! -neo
I currently have UGJ running from my sump. All you need to do is drill a hole in your line leading into your tank from the sump. The hole needs to be high enough to create a siphon break (must allow air in to the pipe). Mine is about 1/4 inch above the water level when the pump is on.
 
ajl10spro;648830; said:
I currently have UGJ running from my sump. All you need to do is drill a hole in your line leading into your tank from the sump. The hole needs to be high enough to create a siphon break (must allow air in to the pipe). Mine is about 1/4 inch above the water level when the pump is on.
Click to expand...


And water doesnt spurt out of the hole?

Oh well anyways i'll probly just do the powerhead method, since i was trying to hide the pipes completely by plumbing throught the bottom of the tank. so if i were to go over the top of the tank and down i might as well just to the safer route and to the self contained jets.

thanks for all your help everyone.
 
You must log in or register to reply here.
MonsterFishKeepers.com
Top Bottom