Just have your returns set up just below the water line. In case of a power outage, they'll drain only until they break the water line and you'll be okay.
return help. back siphoning !!
- Thread starter tanyaelec11
- Start date
here's how far mine are. I get maybe 5 gallons backdrained including whats in the overflowSent from my SCH-R950 using MonsterAquariaNetwork App
For a siphon break, just large enough to introduce air into the pipe and keep water from backflowing. Start small like 1/8" and go from there. Position it so you dont get a pinhole stream of water splashing out of the tank or anything.
Periodically check the hole and make sure it isnt unstructured or w/e during your water changes.
Sent from my SCH-R950 using MonsterAquariaNetwork App
A hole too small will produce a strong stream and cause sound/turbulence at the surface. A hole too big will reduce flow pressure. As stated above, 1/8" is a good starting point
Sent from my iPhone using MonsterAquariaNetwork app
Sent from my iPhone using MonsterAquariaNetwork app
thanks guys. I think I have found my issue. The return is an inch or two below the water line. I am going to cut the pipe to bring it up a bit also I drilled a hole just in case. My spray bar also seems 2 inches too short for how I want it so I guess its back to playing with it. Its my first time so its a few rounds of trying .
