SUNSUN Canister filter ?
- Thread starter Big Dempsey
- Start date
Andrew 69 ,Do you get any leaking there where the u tube connects to the spray bar or did you have to force a fitting into it ? once again thanks !
No I didn't get any leaking, the spray bar for me fit tight, the intake for me was loose so I used electrical tape around the joints
Sent from my SCH-I500 using MonsterAquariaNetwork App
Sent from my SCH-I500 using MonsterAquariaNetwork App
hmm my curved tube that goes to the spray bar just pops off when i attach it, no snug fit what so ever . i'm going to get ahold of the company on monday and hopefully they will remedy it !
Do you have the right piece in place? I had to throw their instructions away and put the pieces together how I thought out fit. I haven't taken the spray bar apart since I put ask of those 90° tubes on there. I'm finding with mine tho that there isn't much suction, not sucking crap up well...it does an ok job but not what I was expecting 
iv had it for about a year now and clean it every month or 2
Sent from my SCH-I500 using MonsterAquariaNetwork App
iv had it for about a year now and clean it every month or 2Sent from my SCH-I500 using MonsterAquariaNetwork App
i have the largest one , 540 gal p/hr on a 90 and it seems to be doing a good job. I also do a 30 -50% partial weekly depending on water parameters , only nitrates go up a bit.
I bought the 375 gph one. I'm setting it up tonight. Mine only came with 3 white fine filter pads, so I'm waiting for the last of the media I ordered to come in. If you're curious each basket holds about 2 liters of media. I bought 2 liters of substrat pro and it filled one basket. I ordered some of the blue sponges, since they were cheap. I put 3 in the middle basket with a white filter pad on top of them. I'm waiting for ehfimech prefilter for the bottom tray. Don't trust the handles on the baskets.
Got the new Jtube that was missing the elbow for the spray bar so now it's compete, and running great !
