For over a year I am running dual overflow 3/4 T ing to 1 inch. So I decided to make a larger overflow for more turn over. While I was at it An Algae Scrubber came into play also. I added Some Pics.
This is my overflow design I tested in the garage it pushes 900GPH with 3/4" hose. I will be using 1 1/4" so it should push some more.
It's 1 1/2 T ing to 2"
This is my design for my Algae Scrubber
This is already built and located on top of my 220 Gallon
View attachment 736371
This 25 Gallon was found on the curb...Thanks neighbor .. So From a 20 long to a 25Gallon sump
I also Took apart some rope LED lights and made some plexi Lights for the Algai Scrubber 216 LEDs per light. 4 lights needed for the Algae Scrubber 864 LEDs total.
Each plate will slide down into the chamber between the scrubbers and make em grow.
Anyway this is what I have been experimenting with for a while now....Almost there.
All the plumbing is in place. Sump and overflow need put under the stand and hooked up. I have Two lights made and need to make a lid for my Algae Scrubber.... Maybe tomorrow I'll have time...
This is my overflow design I tested in the garage it pushes 900GPH with 3/4" hose. I will be using 1 1/4" so it should push some more.
It's 1 1/2 T ing to 2"
This is my design for my Algae Scrubber
This is already built and located on top of my 220 Gallon
View attachment 736371
This 25 Gallon was found on the curb...Thanks neighbor .. So From a 20 long to a 25Gallon sump
I also Took apart some rope LED lights and made some plexi Lights for the Algai Scrubber 216 LEDs per light. 4 lights needed for the Algae Scrubber 864 LEDs total.
Each plate will slide down into the chamber between the scrubbers and make em grow.
Anyway this is what I have been experimenting with for a while now....Almost there.
All the plumbing is in place. Sump and overflow need put under the stand and hooked up. I have Two lights made and need to make a lid for my Algae Scrubber.... Maybe tomorrow I'll have time...
