Wet/Dry Users: What Size Sump and Filter Flow Rate are you using?

[mp3coupe]

40G sump with a quiet one 4000 1017 GPH

same setup

 

[Conner]

125g tank, 55g sump, x2 quiet one 4000 pumps, total gph estimated 1400-1500gph (2 x 1017gph at 5ft head).

 

[esse]

125G tank
20G Sump
950 GPH Pump.

 

[rucus]

300 Gallon Tank w 60 Gallon sump and six foot bio-tower. I'm running an Iwaki MD-70RT, 1100 GPH.

That biotower is awsome. I want one!

 

[packer43064]

515 GPH pump on a 10 gallon sump used for a 55 tank.

 

[wizardslovak]

515 GPH pump on a 10 gallon sump used for a 55 tank.

thx man you just answered my question,
i got 55gall with 10gallon free tank which i am planing to convert into sump but never knew which flow rate to use !
bt what pipe sizes are you running

 

[packer43064]

thx man you just answered my question,
i got 55gall with 10gallon free tank which i am planing to convert into sump but never knew which flow rate to use !
bt what pipe sizes are you running

Well....LOL. I actually don't have it running yet. I just finished making the sump with some extra glass. I got the pump for 20 bucks, pretty cheap. It was discontinued at petsmart in the pond section.

By this sticky http://www.monsterfishkeepers.com/forums/showthread.php?t=205645 I'll probaly use an inch since it's close to 600 gph pump. There will be a little over a foot of head, that's it. Sorry couldn't help anymore.

 

[rallysman]

Frankenfilter is a 100g tub filtering a 100, 125, and 300g with a reeflo dart (3600gph)
http://www.monsterfishkeepers.com/forums/showthread.php?t=176587

I also have a 75g sump on my 265 that's flowing about 800gph with a little giant.

 

[toehead11183]

I have a 175g tank with a cpr194 rated at 200g and 800gph but i run 1200gph on it

 

[mtuttle02]

150G Tank
20G Sump
950 GPH pump- 600 GPH or so after head loss