Whats the cheapest way to heat 1000+gal ?

  • We are currently upgrading MFK. thanks! -neo
I had a 800gallon pond. I used a 800jemco heater plus two 300 watters. And the room temp was around 70-72 and I have the pond at 86. And the heaters wernt on all the time. So it worked good
 
Titanium heaters have better thermo/hydrodynamic heat transfer, as compared to glass heaters. You should look into getting 2 500W titanium heaters and their respective thermostat/controllers
 
thanks for the advice
titanium is better it cant break like glass does and if it heater breaks you can change whichever part is broke so its not total loss
2 is always better than 1:)
 
That one looks familiar. ;)
 
OH MY GOD:cry:
those reviews are awful:eek:
im not shure they are the same brand cause the one i showed u guys doesnt have a lcd display
the calc said 815w as said in 1st page of thread
so the other low cost option is to go with the other heaters u guys showed me
these are the same right:http://www.aquaticeco.com/index.cfm/fuseaction/product.detail/iid/9145/cid/2227
they also sell the controllers on here:
http://www.aquaticeco.com/index.cfm/fuseaction/listings.categories/ssid/376
i will prob get the protector 2 has it has alarm plus a restart switch while protector 1 needs to be replaced if heater overheats
 
You must log in or register to reply here.
MonsterFishKeepers.com
Top Bottom