Why bare bottom?
- Thread starter blackghostknife
- Start date
Thanks, if you do a bare bottom in my opinion white is the way to go with most rays. I use to do black bottoms and have ruined rays colors because of it. If anyone questions is FRP safe I will add I have had it in my 750 for 1 1/2 years now and have had 5 sets of pups with it.
No just layed it in tank like a big mat. It is pretty flexible so it can be bent to get in the tank. I cut it with a circular saw. Not sure why pics are sideways but here is another.
Sent from my SAMSUNG-SGH-I747 using MonsterAquariaNetwork App
Sent from my SAMSUNG-SGH-I747 using MonsterAquariaNetwork App
The frp doesn't trap debris under it? I've been looking for something for awhile to put in my 750(10x4) bottom, but I would have to cut into a few pieces to get through my opening cut outs and was worried it would get all sort out debris under it over time?
It may get a little under it, I said I used a circular saw but remembered now I actually used sheet metal cutters. It is thin material. You could use a straight edge and a utility knife and cut a straight line and snap sheet by bending. If doing in multiple pieces getting a straight cut to mate pieces will be a challenge but not impossible. I use a sponge mop to clean it when in tank so if anything did get under it the pressure of the mop would squeegee it out.
Sent from my SAMSUNG-SGH-I747 using MonsterAquariaNetwork App
Sent from my SAMSUNG-SGH-I747 using MonsterAquariaNetwork App
