zennzzo's LED white /blue 225g hood

  • We are currently upgrading MFK. thanks! -neo
Z

zennzzo

Feeder Fish
MFK Member
Oct 18, 2005
8,052
46
0
67
Mile High in Northern AZ, baby!~
Was trippin' through Wallys today and realized they have the Christmas goodies out...
I just happened to find the bright LED 60light strings for 7 bones a box...
this is just what I needed to finish off the "duce duce 5"
Keep checking back for progress!
Cost so far:
$25.00-3 LED strings of lights

1.jpg
 
greenterra;3601657; said:
I agree with Don..This is unsportsman like.:D
Click to expand...
I really should have collected all my materials before I started this Thread, I know...
But I was so stoked that I had a reason to look in the Christmas stuff before I ate all my left over Halloween junk...And it's not even leftover Turkey season!

Now, I know I have at least 3,471 coax clips with mounting screws somewhere here in my mess...I just spent the last 2 hours looking for 'em.
I'm sure they are right where I put them too...however...

I did find the foam gaskets to my now defunct Magnum 350.
that's gonna help out!!:irked:
Oh yeah and the lonely bio-wheel bushing that goes to that emperor I sold last summer.:nilly:
I also found my 15 dollar caulking gun with a near full sleeve of
GE II Silicone, hard as a whores heart.:grinno:

And you can't have enough 3/4" Bioballs, I found a gallon of those, beings I'm the Xtreme SCRUBBIE guy, those gotta be worth something...:screwy:

Hmmm...Wonder if I can Hot Glue the bulb holders in place then wire-tie
the wiring together to make the harness...

I could use a strip of 1/2" hardwood, drill holes for the individual bulbs at the desired spacing and then hot glue them into place, I can silicone the bulbs to make them condensation proof and ziptie the wiring to make the harness!! All nice and straight evenly spaced, and water resistant...
;) :D ;) :D :thumbsup:

MuHahahahha... SCREW YOU coax clips!! I'll find you another day...
Like a day when I do not need you, then I'll treat you just like I did the foam gaskets from the Magnum 350 carbon container...
Yeah, then you'll see who's BOSS!!:naughty: :screwy:
 
zennzzo;3601697; said:
I really should have collected all my materials before I started this Thread, I know...
But I was so stoked that I had a reason to look in the Christmas stuff before I ate all my left over Halloween junk...And it's not even leftover Turkey season!

Now, I know I have at least 3,471 coax clips with mounting screws somewhere here in my mess...I just spent the last 2 hours looking for 'em.
I'm sure they are right where I put them too...however...

I did find the foam gaskets to my now defunct Magnum 350.
that's gonna help out!!:irked:
Oh yeah and the lonely bio-wheel bushing that goes to that emperor I sold last summer.:nilly:
I also found my 15 dollar caulking gun with a near full sleeve of
GE II Silicone, hard as a whores heart.:grinno:

And you can't have enough 3/4" Bioballs, I found a gallon of those, beings I'm the Xtreme SCRUBBIE guy, those gotta be worth something...:screwy:

Hmmm...Wonder if I can Hot Glue the bulb holders in place then wire-tie
the wiring together to make the harness...

I could use a strip of 1/2" hardwood, drill holes for the individual bulbs at the desired spacing and then hot glue them into place, I can silicone the bulbs to make them condensation proof and ziptie the wiring to make the harness!! All nice and straight evenly spaced, and water resistant...
;) :D ;) :D :thumbsup:

MuHahahahha... SCREW YOU coax clips!! I'll find you another day...
Like a day when I do not need you, then I'll treat you just like I did the foam gaskets from the Magnum 350 carbon container...
Yeah, then you'll see who's BOSS!!:naughty: :screwy:
Click to expand...

That sounds like a normal day for me. lol



But back to the lights, how bright are they?
 
You must log in or register to reply here.
MonsterFishKeepers.com
Top Bottom