zennzzo's LED white /blue 225g hood
- Thread starter zennzzo
- Start date
OMG after 1 AM!!?!
I gotta put the toys away for now...Dammit!!
Here is what I've been looking at cross-eyed.
Running my Compound Miter saw in the middle of the night ought to be Pissin' off the neighbors by now...
ahhhh WTH
it IS Fri night...
Pics as soon as I can see straight again!
In the AM...
I gotta put the toys away for now...Dammit!!
Here is what I've been looking at cross-eyed.
Running my Compound Miter saw in the middle of the night ought to be Pissin' off the neighbors by now...
ahhhh WTH
it IS Fri night...
Pics as soon as I can see straight again!
In the AM...
When buying those Xmas LED's please check that you buy the 2 Watt LED's.
If you get the 1 Watt type, they'll not have enpough light to reach the bottom of your tank!
The 2 Watt LED's will easily reach 2 foot through the water. I just bought a 30' lightline, bundled the LEDs together and kinda threw them on my tank. Looks stupid but is actually the best addition made to my tank ever!
and i can't get those nightlights on camera, but this gives a lil' bit of the idea.
If you get the 1 Watt type, they'll not have enpough light to reach the bottom of your tank!
The 2 Watt LED's will easily reach 2 foot through the water. I just bought a 30' lightline, bundled the LEDs together and kinda threw them on my tank. Looks stupid but is actually the best addition made to my tank ever!
and i can't get those nightlights on camera, but this gives a lil' bit of the idea.
All cuts are done and 1st Sanding of surfaces to be screwed together are finished.
I'll be using standard PVC cement and #8 - 3" galvanized screws.
It's hard to find stainless steel screws in this type, so I went with the next best thing...
I was concerned with the screws all being spaced the same, so I made this Jig to keep things uniform.
I'm using a #8 countersink bit and will make the heads of the screws stop just under the surface of the boards. I'll be able to fill and smooth it out prior to painting...
I will start assembly and post more pics later...
I'll be using standard PVC cement and #8 - 3" galvanized screws.
It's hard to find stainless steel screws in this type, so I went with the next best thing...
I was concerned with the screws all being spaced the same, so I made this Jig to keep things uniform.
I'm using a #8 countersink bit and will make the heads of the screws stop just under the surface of the boards. I'll be able to fill and smooth it out prior to painting...
I will start assembly and post more pics later...
zennzzo;3621561; said:**me looks around**
...and where did you put it??
http://www.monsterfishkeepers.com/forums/showthread.php?t=273226
Very nice...you'll receive a million compliments on that one Bro...Tilapia Buttikoferi;3621731; said:
