My original thread is way out of date and not really relevant since the plans have changed so much since then, so now real progress is being made it's time to make a proper build thread.
Tank: 2400x1200x700 (LxWxH) 15mm glass
Stand: 2400x1200x400 glav steel
Sump: still in the planning stages
Pump: Laguna MaxFlo 2900
Lighting: DIY LED, eventually...
Fish (so far): Black arowana
3x L190 royal panaque
2x L128 blue phantom
3x L14 sunshine/goldy plec
L81 gold nugget
L002 tiger panaque
6x Geophagus altifrons
2x Pterophyllum scalare 'Peru Altum'
certainly more to come...
Decor: sand substrate, driftwood, rocks
The tank will be set up in a dedicated room downstairs, with the overflow plumbed through the wall into the garage where the sump will be located. Hopefully the actual build of the tank and filtration won't take too long now that it is actually under way, but it will be a long-term project in terms of "finishing" things like the lighting, timber fascias, etc etc that aren't critical to the running of the tank. I've never actually completely finished a tank to the point where I'm happy with every aspect of it, so hopefully this will be the first...
First up, here's how I envisage it to look;
The stand is finished and off to the paint shop tomorrow. Looks solid! According to the friend who made it two people can carry it, but it felt pretty heavy to me when I tried moving it...
wife wasn't happy with this photo, but I needed something to show scale...
The top part is made from 100x50x3mm galv steel along the front and back, and 100x50x5mm for the 1100mm spans running front to rear. The rest is 50x50x3mm, and the gussets are 6mm plate. I chose to go only 400mm high as I'll be adding another 40mm with plywood and polystyrene, and I want the tank at a good height for viewing while sitting on a couch. It will be the same height as my previous 1400L tank, which worked very well in terms of viewing and maintenance.
This is my most recent and favourite design for the sump, incorporating a large settling chamber to catch all the heavy waste (panaque sawdust etc) before flowing thru Poret foam and pond matrix. There is a thread for discussing the idea here
Here are some of the pics from the previous thread that are somewhat relevant to this one.
Digging for driftwood;
Testing the size of the tank in 1:1 scale, who needs SketchUp when you've got beer crates, garden stakes and bed sheets!
Removing flooring to waterproof the concrete slab. I've kept some pieces to put down in the gaps either side of the tank once it is in place.
More wood, soaking in our old swimming pool at Mum and Dads, it has all sunk now and is ready to go.
And last but not least, a couple of the fish!
I can't believe I started the other thread nearly six months ago and it has taken this long to get to this point. After seeing the stand today I've found my enthusiasm for this project once again and will try to keep it moving as steadily as possible!
Tank: 2400x1200x700 (LxWxH) 15mm glass
Stand: 2400x1200x400 glav steel
Sump: still in the planning stages
Pump: Laguna MaxFlo 2900
Lighting: DIY LED, eventually...
Fish (so far): Black arowana
3x L190 royal panaque
2x L128 blue phantom
3x L14 sunshine/goldy plec
L81 gold nugget
L002 tiger panaque
6x Geophagus altifrons
2x Pterophyllum scalare 'Peru Altum'
certainly more to come...
Decor: sand substrate, driftwood, rocks
The tank will be set up in a dedicated room downstairs, with the overflow plumbed through the wall into the garage where the sump will be located. Hopefully the actual build of the tank and filtration won't take too long now that it is actually under way, but it will be a long-term project in terms of "finishing" things like the lighting, timber fascias, etc etc that aren't critical to the running of the tank. I've never actually completely finished a tank to the point where I'm happy with every aspect of it, so hopefully this will be the first...
First up, here's how I envisage it to look;
The stand is finished and off to the paint shop tomorrow. Looks solid! According to the friend who made it two people can carry it, but it felt pretty heavy to me when I tried moving it...
wife wasn't happy with this photo, but I needed something to show scale...
The top part is made from 100x50x3mm galv steel along the front and back, and 100x50x5mm for the 1100mm spans running front to rear. The rest is 50x50x3mm, and the gussets are 6mm plate. I chose to go only 400mm high as I'll be adding another 40mm with plywood and polystyrene, and I want the tank at a good height for viewing while sitting on a couch. It will be the same height as my previous 1400L tank, which worked very well in terms of viewing and maintenance.
This is my most recent and favourite design for the sump, incorporating a large settling chamber to catch all the heavy waste (panaque sawdust etc) before flowing thru Poret foam and pond matrix. There is a thread for discussing the idea here
Here are some of the pics from the previous thread that are somewhat relevant to this one.
Digging for driftwood;
Testing the size of the tank in 1:1 scale, who needs SketchUp when you've got beer crates, garden stakes and bed sheets!
Removing flooring to waterproof the concrete slab. I've kept some pieces to put down in the gaps either side of the tank once it is in place.
More wood, soaking in our old swimming pool at Mum and Dads, it has all sunk now and is ready to go.
And last but not least, a couple of the fish!
I can't believe I started the other thread nearly six months ago and it has taken this long to get to this point. After seeing the stand today I've found my enthusiasm for this project once again and will try to keep it moving as steadily as possible!