My fish house build

  • We are currently upgrading MFK. thanks! -neo

Jmahn

Plecostomus
MFK Member
Dec 31, 2017
126
129
61
31
Scotland
So I have been building a shed/outhouse for the last couple of weeks was trying to track with photos thought this be best archive for me to use lol plus thought I'd share. I have always struggled for space having a family 3 young kids and a amazing gf moved about alot but settled in her "hometown" for a couple years now. Finally convinced her and the landlord (I rent) to let me build on half my back area. So it's a 19ft x 8.5ft space raised up in my back garden with walled around and fenced on the back Il attach pics problem was it wasn't square or level so I had to build some up and some out to square it off. Ground work was easy done that some 7-4 years ago. Decided I was going with slabs for the floor and incorporating the wall around the garden. Also covered steps with wood and painted cause the landlord said I couldn't remove them. Placed a hep2o pipe for water and put a drainage pipe in where I'm gonna place sink. After a ton and a half of type one and bricked up and build out then a ton of sand and some 50-60 slabs later got the floor as level as I could. Considering the run it was in pleased with how they turned out and cemented into the wall hunching(just eye pleasing Lol. Then the posts went in had to attach holders through the slabs and cement base for the last 3. Then beams flew up. I'm throwing up panels to give a frame then outer side will be plastic sheeted and cladded to finish. The inner side will be insulated and plastic sheeted then cladded to an inside finish. Managed to do both sides and back today also made a concrete hunch where the panels meet the wall so water runs off. Roof panels come tomorrow its pitched back to run away from shed it will be guttered in the end. Collected my door and windows today a steal at the size of them still need to get pics of them but I am so happy with what progress I've made in about 2 weeks. End game get they big tanks I could never have and donate a corner to a raised up bricked Nd insulated pond it will have its own fuse board and circuit and I plan to run a greenhouse heater for heat obv just be trail and error with ventilation and Ideal temps anyways wish me luck guys lol1377132
This is before any work
1377136
Lots progress ground work just never pictured the whacking cause made a shelter cause it was raining like f$*k. Took alot of levelling bout 3-4 hours shovelling and barrowing in type 1 and sand.
13771371377138
Went through the night with the it's and a few beers lol
1377139
Once slabbing was done more posts in
13771401377141
Build up for structure purposes this won't be visible end game just an internal skin between cladding and insulation.
1377142
Doors and windows I got also
1377143
Only stump rear beam has to be moved for structure purposes and roofing sheets come tomorrow lol so job 1 after my youngest transition into primary school.1377144
Cut 3 outta 9 beams i need for front to back beams but light gave way so packed up. Hope u enjoyed this read and Il try get what updates I can when I can thanks for reading
 
So raised the beam today and got the beams and roof up looking sweet was a pain in the *** turned out a 6 inch raise for the door I already have for the back was either that or build a door and frame which would've consumed more time than worth. Happy with how much i got done with the help of a couple mates. Tomorrow I'm going to put plastic over roof and felt it exciting it's coming together.
1377256
The dreaded 6 inch raise lol
1377257
Beams and sheets up.
1377258
Bro in law working hard lol
1377259
Wee light up for the dark
1377260
Still to sheet and felt
 
We just put up roof shingles in June in the desert. Roofing is just the worst part of every job. ;)
 
  • Like
Reactions: Jmahn
We just put up roof shingles in June in the desert. Roofing is just the worst part of every job. ;)
That's it felted with the plastic sheeting underneath weather was good to me today 1377356
Just need to sheet sides and tap under woods running low so gnna be door frame for front next and back as the run being a water through the gate
 
  • Like
Reactions: BichirKing
Got some framing done and the smaller window in today after having to remove and re level it lol woods been deleyed for my next timber order til mon/tues gutted lol hopefully got enough to frame door in tomorrow 1377477
Squint window lol

1377478
Level window and a good mate lol
 
Buddy, that Scottish of yours needs more punctuation! It's sometimes beyond my ken. ;)

But kudos on recycling. Here we have the luxury of new lumber ready at hand for most things.
Still, I am not known to toss a used board unless it has terminal defects.

Evidently there's a good bit of Scot somewhere in my ancestry. :thumbsup:
 
Buddy, that Scottish of yours needs more punctuation! It's sometimes beyond my ken. ;)

But kudos on recycling. Here we have the luxury of new lumber ready at hand for most things.
Still, I am not known to toss a used board unless it has terminal defects.

Evidently there's a good bit of Scot somewhere in my ancestry. :thumbsup:
Haha yeah I get that alot pmsl yeah all the boards (going between insulation and outer claddin) are recycled all framing and posts new the cladding on inside and outside will be new also to please the missus lol basically an inner structure lol
Also shout out to ur inner Scot embrace it :headbang2
 
  • Like
Reactions: Ulu
Slow weekend was out with family got more of the framing done now just to wait on my delivery of wood good thing I installed a hammock lol
1377709
 
  • Like
Reactions: Dloks
Got stuck in today sheeted front got other window in and prepped the door to slot in for the front taking shape
1377867
1377868
Just finishing this sheet then cut out window
1377869
Window from inside
 
  • Like
Reactions: Dloks and dr exum
MonsterFishKeepers.com