Sorry I’m not following. Stat? Fill what exactly? The aquarium? If it’s going to be a FOWLR setup just use tap water, prime, and mix the salt directly into the tank. If it’s going to be a reef most would recommend doing the same but with RODI water. For myself on initial fill I just used tap as I have good quality low TDS water.Lepisosteus what's the fastest way to fill these thing? I need about 250 gallons of sw stat
Sorry I’m not following. Stat? Fill what exactly? The aquarium? If it’s going to be a FOWLR setup just use tap water, prime, and mix the salt directly into the tank. If it’s going to be a reef most would recommend doing the same but with RODI water. For myself on initial fill I just used tap as I have good quality low TDS water.
I had two of those water storage bins that you can get at the farm stores. 2×300g 1 mixed SW and the other rodi. It took a bit in the begining but once those were filled not a big deal. Id use the SW one on my everyother week waterchange then just put salt in the empty one open a valve and dump the rodi one in to it and turn on a pump to mix. Then just had to wait 3 days to fill the rodi one again. Rodi unit was good for 100gpdLepisosteus what's the fastest way to fill these thing? I need about 250 gallons of sw stat
Picked up another small mandarin today. Been in the tank for 2 hours and already feeding on frozen foods.