Search results

I've looked everywhere... I can't find any.... Not even in aquabid....

Thanks man!

Thanks a for the reply. ... Do you mean just wood glue the main, and screw it to another piece of ply wood that will be overlapping? Should I screw join it? How are the reviews on that epoxy? That's roughly the same price as pond shield here in Canada. Or do you get more for the price...

Bump

Not sure sure this is going to be a forever home lol... But that would be a lot easier..... So screw joint/glue and fiberglass.. Should be good enough to hold up?? Anyone else using any cheaper alternatives to pond shield or is that the go to...... Pretty damn pricey.. Compared to...

What's recommended ...... I'd like a 10 to. 15 foot long plywood. Tank... I just have no way of. Getting it to the basement.due to the demensions of WIndows. As well as stair case..... Need. Some. Ideas.....

Could I use a pocket jig and screw join a couple 4x5 sheets? It's the only way I can get the sheets down the basement. Then just use fiberglass at the joints?

Could I use a pocket jig and screw join a couple 4x5 sheets? It's the only way I can get the sheets down the basement. Then just use fiberglass at the joints?

I'm from Canada. Where is the cheapest place online in the USA. For a ehiem 2262?

Long time lurker of this board. I don't post often. I had a question. I've been trying to look everywhere over the internet to see how people are building plywood tanks that are longer than 10 feet? I'm looking to build a 10ft long x 5ft wide x 30" tall tank. How are people adding the...

thanks for the info. I think i might go with the west systems just to be on the safer side, i dont think id have the patience to wait weeks for liquid rubber to cure.... So basically the fiberglass sheets are just to help for punctures etc...? and is basically not needed with west systems, has...

so how are people getting there glass set in with liquid rubber, obviously people have done it. dont be shy, tell us how?

Im in sarnia ontario... Look to see if you have a Roofmart in your area, im sure you do. Go to their website and check out their locations.... still debating on what i should use. Seems like you have to wait for weeks for the silicone to cure before adding the liquid rubber... I think I may go...

are they as energy efficient as regular aquarium pumps?? or they going to rape me in the power bill department?

I was curious how do you determine flow rates in GPH... according to the circumfrance of a bulkhead... for example. a 2" bulkhead over flows at a rate of 600 gallons per hour... ( i dont know the real answer just an example) I need to figure this out so I know what size of pump to get. and...

I opend the box when i was at the store its a 120v. Im guessing she will be pretty darn loud. But it wouldnt take much to get some cheap sound proofing insulation and make some sort of box around it

http://www.homedepot.ca/webapp/wcs/stores/servlet/CatalogSearchResultView?D=979035&Ntt=979035&catalogId=10051&langId=-15&storeId=10051&Dx=mode+matchallpartial&Ntx=mode+matchall&recN=0&N=0&Ntk=P_PartNumber

has anyone used this brand of pump before on their tanks?? they are for ponds, but they have really high flow.. and they are very reasonably priced. http://www.algreenproducts.com/products_catalogue.php?cat=Pond Pumps&id=9160591606 I think it was 5000 gph for 199.00 I havent found a better...

what are some pros and cons of each??? i need some help choosing here, both are readily available... its about 190 bucks for the expoxy and the mixing pump they reccomend? is the pump necessary?

so basically saying, if i use the west systems i can get the tank done alot quicker? frig for the fiber glass matting they want like 12 dollars a yard... thats sorta pricey,,,, but it seems people are having a hard time getting the glass to set using liquid rubber... so it maybe worth the extra...