Little update. I got the plywood on top of stand and level. Then a little OCD kicked in because the stand was about 1/32 from fully level so I took the tank off again moved the stand because I wanted to switch from the pads under the 135 sump to a scrap piece of the plywood sheet since I have it. Then I'll level the sump to the floor, stand to the floor, then make sure plywood to stand is good then put the tank back on.
It's a dang good thing all the fish are comfy in an extra 125 I had cause this project went from a weekend to almost 3 weeks
It's a dang good thing all the fish are comfy in an extra 125 I had cause this project went from a weekend to almost 3 weeks
