240 g 8x2x2.!

[pwmin]

Thanks Paul. Yea I will shop that around for you also and let you know what I come up with. Is it drilled?

If you're interested in the colorquartz, the CO distributor is the Rio Grande Company, 201 Santa Fe 303-825-2211. They said it was about $21 for a 40 lb. bag of black s-grade. It is not drilled nor does it have overflows but that's ok.

 

[ScullCraca]

Well the largest Little giant I foudn was rated 2250 at zero head...And pushed max of 445 watts...

Compared to the 3600 @ zero for the Dart that boasts a max of 160 watts i believe

I am going to search around on the Dart. It sounds like the pound for pound BIG Dog! Will give me more then enough filtration for years to come.

 

[Tongue33]

I was thinking of running a 1/4 inch pvc cut in half along the top of the tank angled back towards the pvc returns to the drip plate's. I would cover the top of the 1/4 pvc with mesh to keep out uneaten food. What do you think should it work? Run one on each side at the top. Will that work?

You lost me here...

 

[ScullCraca]

If you're interested in the colorquartz, the CO distributor is the Rio Grande Company, 201 Santa Fe 303-825-2211. They said it was about $21 for a 40 lb. bag of black s-grade. It is not drilled nor does it have overflows but that's ok.

Ahh Thanks Paul! Been calling around a getting nowhere fast! I will give them a call next weekend. Sweet! Ah that's no prob. I just know someone looking for a pre-drilled I could of dropped a line to. But I will still Mouth Piece for you I got a few people acting like they ready to get in the hobby. I will let you know Sat. for sure.

 

[ScullCraca]

You lost me here...

If i didn't drill it using these as DIY returns?

 

[Tongue33]

OH... The tank is not drilled... I am a dumb A sometimes.. I didn't read that part fully i guess...

 

[ScullCraca]

I could draw it up but don't really know how to get my drawing on the computer. I am a little "OLD School" DKSAC! (Don't Know sh-t about computer's!)

 

[ScullCraca]

OH... The tank is not drilled... I am a dumb A sometimes.. I didn't read that part fully i guess...

Yea my bad. And I really don't want to drill. So I was thinking way outside the box. And make the returns Diy also but they will return from the bottom! To push waste up.

 

[Tongue33]

 

[ScullCraca]

You like where I am going with this?