Anybody ever use one of these?

  • We are currently upgrading MFK. thanks! -neo
hangner;1334085; said:
sent!
dont know why the attachements from paint dont work for me on mfk
anybody know?


i have to find our quarintine


############################################################################
Panda ClientShield warning:

The file rough filter.bmp was potentially dangerous and was moved to quarantine.
############################################################################
yeah so that is the first part of the filtration and like i said it then gravity feeds a skimmer and bio tower
:irked::irked::irked::irked::irked::irked::irked::irked::irked::irked::irked:
 
hangner;1334085; said:
sent!
dont know why the attachements from paint dont work for me on mfk
anybody know?

Save the files as jepg...NOT bitmap's....then they will display just fine on the board.

There is also the possibility of using a high efficiancy large flow pump like Johns talking about combined with a smaller lift pump on the feed side to over come backpressure. I've used similar set-ups on ponds before and it works great without breaking the bank.
 
LOL yes...slight keyboard dyslexia....
 
ok im pissed this aint working
here is a version of the fbf
sump is 2-3 feet high with pump at same level sucking with a pipe going down inside the sump
the "in" part of the fbf is the long pipe and it is 4-5ft high
i had to copy paste this in place(from website) cause attachements dont work
fluid-sand-tower.jpg


test1.JPG
 
MonsterFishKeepers.com