Anyone use commercial metal shelving for stands?

  • We are currently upgrading MFK. thanks! -neo
tlindsey said:
What exactly do want to place on the storage shelf? I also agree with TwoHedWlf TwoHedWlf .
Click to expand...

A couple of tanks if possible. I'm looking to re imagine the fishroom so I have less tanks. Ideally I'd like to get a 90 gallon and put two BPs in it with a divider. The BP in my office I could swap into the remaining leftover tank so he wouldn't be isolated.
 
  • Like
Reactions: tlindsey
DMD123 said:
Sorry wrong link try this one, it has more pics and details:

Weight Distribution of Aquarium on Shelving

Yet another consideration, besides floor not being level... wall also not straight. This means the gap behind is not uniform. It’s totally fine looking but on the left side the rach is a bit further from wall. lol, making me talk about the project has made me remember a lot of the challenges...
www.monsterfishkeepers.com www.monsterfishkeepers.com

I did do a bit more work so I best pop a couple pics up here:

Main set up before seating
View attachment 1424417
Got my table and bar stools in place
View attachment 1424418
I decided to cap the ends for a more finished look
View attachment 1424419
Other side got hooks to hang fish towels up to dry
View attachment 1424420
Click to expand...

Your setup is the one I had in mind. No problems with bowing, sagging or stress?

What size are your tanks on those?
 
How big are the tanks going to be?

Might be the nerd coming out in me but take into consideration the deflection factor with the actual shelf platform. Some of the press board sold on the high weight capacity shelves even say the load as to be evenly distributed across the whole shelf to reach that weight limit. So single points of a smaller tank might max out the load if there is no center support under the shelf wood.
 
  • Like
Reactions: deeda and tlindsey
Dalfrey86 said:
How big are the tanks going to be?

Might be the nerd coming out in me but take into consideration the deflection factor with the actual shelf platform. Some of the press board sold on the high weight capacity shelves even say the load as to be evenly distributed across the whole shelf to reach that weight limit. So single points of a smaller tank might max out the load if there is no center support under the shelf wood.
Click to expand...

I'd probably just go with 3/4" pine...I did that with the acrylic tank in my office. It's over a Kaitec metal frame...just painted the edges black to blend in.
 
FINWIN said:
Your setup is the one I had in mind. No problems with bowing, sagging or stress?

What size are your tanks on those?
Click to expand...
Top tanks on right and left are standard 75 gallons, below them are 65B. The center tank is a 36", 30 gallon. I could have done a breeder tank but didnt want to there because of the window and blinds behind it. No issues with sagging or anything like that but when looking at it all you really feel it should be thicker, lol.
 
www.homedepot.com

Husky Black 4-Tier Heavy Duty Industrial Welded Steel Garage Shelving Unit (77 in. W x 78 in. H x 24 in. D)-HBR782478W4 - The Home Depot

Perfect for organizing your garage or workshop, Husky's Steel I-Beam Shelving Unit measures 78 in. H x 77 in. W x 24 in. D. The 4 adjustable wire shelves provide ample storage space to accommodate a variety
www.homedepot.com

would anyone trust a 125 on one of these with four 1 inch thick 2x4s supporting from back to front. tank would be on the bottom or 2nd shelf bare bottom no rocks or substrate. says each shelf can support 1500lbs of evenly distributed weight.
 
THE FAMILY GUY said:
www.homedepot.com

Husky Black 4-Tier Heavy Duty Industrial Welded Steel Garage Shelving Unit (77 in. W x 78 in. H x 24 in. D)-HBR782478W4 - The Home Depot

Perfect for organizing your garage or workshop, Husky's Steel I-Beam Shelving Unit measures 78 in. H x 77 in. W x 24 in. D. The 4 adjustable wire shelves provide ample storage space to accommodate a variety
www.homedepot.com

would anyone trust a 125 on one of these with four 1 inch thick 2x4s supporting from back to front
Click to expand...
I have that same one and I wouldn’t trust it with a 90.
 
  • Haha
Reactions: Dalfrey86
They give you 3 support beams if I remember correctly. Buy 6 more or use all 3 on a single layer if you shall only have 1 layer with a tank on it. I still would get 6 more. Or just get a welder to weld it together.
 
You must log in or register to reply here.
MonsterFishKeepers.com
Top Bottom