matt clark;4663672; said:i am in guernsey channel islands. the problem is the airport is so small they have to go to uk first as a large plane can not land on the runway
![]()
Ah, now I see. Yeah that would make things a little more difficult
matt clark;4663672; said:i am in guernsey channel islands. the problem is the airport is so small they have to go to uk first as a large plane can not land on the runway
![]()
thanks. i dont think i would use anything else over the years i have used fibre glass for all sorts of things but this is the first tank i have ever build with itjimus1219;4685945; said:Very nice Ive done many DIY tanks my most recent is 60' inch long, 20' inch wide by 25' inch tall all glass. I never thought of using fiber glass though.
if done right you cant go wrong with fibre glass.tor_erik70@hotmail.com;4686146; said:For me i think fiberglass is a cheap way of ensure a large plywood tank.. I think that many of the plywood tanks that has gone leek would be intakt if they used fiberglass, its superstrong, and will hold the overlaps of plates and corners exeptionaly good together..No stretching. For myselfe i think i maybe would have used fiberglass all over the tank, just to be sure, its a cheap ensuranse.. If i havent missunderstood very bad, fiberglass keeps water itselfe..Double safe.
Eric A;4693841; said:G'day Matt.
Interesting build, definantly keeping a close eye on this, keen to see how this turns out.
Also, I was wondering are you Matt Clark from PFK at all?