Bulkhead sizing

[Lukemitchell]

Try ebay or amazon. Usually good deals on there. I usually use the common type made of abs. When you cement them with pvc cement just hold them a bit longer than you would for normal pvc to pvc connection. The pvc cement is a strong solvent on abs so it takes longer to cure. I hold them for about 1 minute.

Ok thanks again I appreciate the info

 

[Oddball]

A little late but, here's a reference:

 

[Lukemitchell]

Does anyone know where I can get good quality bulkheads in the UK ? Also is it the slip x thread ones I'd need to put pvc tube inside it for a stand pipe ?
Thanks

 

[Bigfishnut]

Slip x slip....did you check on ebay?

 

[Lukemitchell]

Slip x slip....did you check on ebay?

Ye I've checked eBay but nothing there seems to be know where that sells them.