so i starting slowly to put somethin together. here is the pump. do to its size i think i have to go 6ich pipe. there is a suply store here that has it.
canister filter idea
- Thread starter deepdivered
- Start date
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
yes it would work.
id use use the biggest pvc tubes you could find with end caps on the bottom and screwable caps on the top
id use use the biggest pvc tubes you could find with end caps on the bottom and screwable caps on the top
3 tubes of each what?redtailshark1;4051695; said:have 3 tubes of each.
ya i have a plumbing supply shop that sales 6 inch pvc
cant find the kine of cap i need may use a union insted
http://www.usplastic.com/catalog/item.aspx?itemid=44523&catid=592
http://www.usplastic.com/catalog/item.aspx?itemid=44523&catid=592
dont tear up your current fillters.
I would find three 5-gallon buckets, that is water tight, and then build this filter.
http://www.bayteccontainers.com/5galsctoppad.html
use this as the bucket, connect them togeter with pvc, and then use a pump at the end to pump it through
I would find three 5-gallon buckets, that is water tight, and then build this filter.
http://www.bayteccontainers.com/5galsctoppad.html
use this as the bucket, connect them togeter with pvc, and then use a pump at the end to pump it through
ya lol relized the price after i posted it so i changed my post. i starting to finde the caps i need for the ends. just taking some lookingjohn73738;4052498; said:For a 10' section you could buy two smokin canister filters.
this filter didnot work any longer so i tore the pump out of it. it leaks and after lots of reading i learned this model is prone to leak. i got it for free and all ready tore it apart. i am also thinking about trying the buckets it may be much cheaper for parts and lots larger.xdragonxb0i;4052503; said:dont tear up your current fillters.
I would find three 5-gallon buckets, that is water tight, and then build this filter.
http://www.bayteccontainers.com/5galsctoppad.html
use this as the bucket, connect them togeter with pvc, and then use a pump at the end to pump it through
this filter didnot work any longer so i tore the pump out of it.
Too bad.
Good news is all you have learned.
I have always picked up, “Tricks-n-Procedures” on a build.
Quite often more knowledge on the projects that didn`t work.
Too bad.
Good news is all you have learned.
I have always picked up, “Tricks-n-Procedures” on a build.
Quite often more knowledge on the projects that didn`t work.
