Hey guys I figured I would share my latest addition to my setup with my fellow Cichla members. After lugging buckets and draining tank water into my kitchen sink I came up with a solution to make my life a bit easier (and the wife a bit happier). I decided to run a drain to the back of my fish tank and install a ball valve to drain the tank for my water changes. If I need to vacuum my sand I can stick my syphon right into the vent pipe and go to town. When the tank is clean I can open the valve and drain the rest of the water half way. To put the water back in I made a in-line carbon filter that attaches to the sink that I can refill the tank back up with the correct temperature water. Enjoy