DIY lowes led light

  • We are currently upgrading MFK. thanks! -neo

mike_sema

Hail Hogs
MFK Member
Jul 13, 2008
2,230
6
0
HOT Water
OK I had a carol life PC 4x65 10000K/50/50 in it that was a bit much for my polys so I decided to make something a bit less crazy of a light lol

so this is what I did

1st got an old school hood light from the garage lol
DSCN0567.JPG
2nd took out all the wiring and ballast no pic but you get the point
3rd got 6 outdoor water proof standard light sockets from lowes cost $3.50 each
DSCN0565.JPG
marked wear I wanted the lights to go and drilled 3 holes 1 for the wires and 2 for the zip ties
DSCN0562.JPG


then mounted them and wired them up nothing to complicated at all really only took about an hour to complete
DSCN0563.JPGDSCN0564.JPG


DSCN0556.JPGDSCN0557.JPG
I forgot to mention the light i used are utilitech pro 120v 4w 60hz

DSCN0567.JPG

DSCN0565.JPG

DSCN0562.JPG

DSCN0563.JPG

DSCN0564.JPG

DSCN0556.JPG

DSCN0557.JPG
 
What are those plants on top of the light, are they outside the tank or is some of it inside ?
 
How is it on the heat? You know how it is here in AZ. I almost never have my lights on in the summer to keep the heat down in my tank......

the LEDs seems to put off next to nothin compared to other light i haved used, I keep the lights on with this setup almost all day
 
MonsterFishKeepers.com