Finished sump :D
- Thread starter bigcol
- Start date
markx2005;3146886; said:
Dont know m8, he said he wanted ta see if he could get temp up a bit, but a reckon 26 should be fine on mine as theres more catfish than anything
ive just made a wet/dry filter for the top of the sump where the water enters, tell me what ya think guys
I also added some jad matting into the baffles, will this also work or are they not needed there?
I also added some jad matting into the baffles, will this also work or are they not needed there?
Ricko;3152357; said:"The Marine"(sorry for laughing)
Different way for putting the inserts in,,, very interesting!
thanks 
JohnM;3152377; said:
Im not sure if it works the same way or not, im open to all suggestion though on how to get the ultimate filteration
I could allways put the bio balls in the wet/dry before it gets down to the 1st section hmmm
markx2005;3152538; said:
Ive put the bio balls in the wet/dry, raised from the bottom of the tub and filter wool under neath in the sump , about 7" below the wet/dry, with jad matting under that, the 2nd chamber is empty but the 1st baffle has jad matting in it, then the 2nd baffle has nothing in, then the scrubbbies in the 3rd chamber nd the last baffle has nothing in also, the pump is in the last chamber.
I was thinking of using the empty chamber (middle of sump) as a holding tank for the jag babys, this is also where the heaters will be sitting on sand or gravel
Looks awsome and think it will work great, cant wait to get the pipe work to get it up and running
