Fish Room and Indoor Pond 24' by 7' by 4'
- Thread starter AW7020
- Start date
Just finish reading this thread from the beginning and what a bummer?! No updates lately...
I thought there woulda have been a picture of the finish product when I got to the last page.
Either way, awesome project and still waiting for the outcome...
I thought there woulda have been a picture of the finish product when I got to the last page.
Either way, awesome project and still waiting for the outcome...
Shees...se!! been out of the internet for about a month since moving house to this new one with the fish room. Busy busy etc with the house painting. redone the grills colors etc.. The Internet provider was not able to reconnect the services at the new premises due to the phone cable being unavailable at the new house. After waiting weeks for them to sort it out (Still no telephone line at the moment) had to cancel their services and opted for a new one (Different Service provider) which is using a wireless modem which make use of the available gprs, WCDMA mobile network. Should have done that earlier.
It's been a month. now and as a quick update the filter system is up and running for the last 2 weeks. Will rewind the events in a few more postings asap. Just got the net up this hour.
Cheers.
It's been a month. now and as a quick update the filter system is up and running for the last 2 weeks. Will rewind the events in a few more postings asap. Just got the net up this hour.
Cheers.
Here's some views of the preparation and before pictures.
Cleaning, washing was done and the pond was left to dry for a few days before the Filter Sections were glued up using silicon glue and plate glass which was cut to size by the supplier.
1. Indoor Pond final washing and draining to be done. Notice the fine layer of Cement powder on the pond floor.
2. Filter section being washed and cleaned and then left to dry out for a few days.
3. The pumps, filter media, Silicon Glue, Air pump that will be used in the filter.
4. Plate Glass which have been cut to fit the wall of the Filter Section. Cleaned and Ready for the Silicon glue.
5. Silicon Glue, Applicator, Cloth, Razor Sharp Knife and Large Tissue Roll to clean up the glass before glue application.
Cleaning, washing was done and the pond was left to dry for a few days before the Filter Sections were glued up using silicon glue and plate glass which was cut to size by the supplier.
1. Indoor Pond final washing and draining to be done. Notice the fine layer of Cement powder on the pond floor.
2. Filter section being washed and cleaned and then left to dry out for a few days.
3. The pumps, filter media, Silicon Glue, Air pump that will be used in the filter.
4. Plate Glass which have been cut to fit the wall of the Filter Section. Cleaned and Ready for the Silicon glue.
5. Silicon Glue, Applicator, Cloth, Razor Sharp Knife and Large Tissue Roll to clean up the glass before glue application.
