Fluval Fx6 cannister filter not starting properly

Anil Dongol

Feeder Fish
MFK Member
Oct 30, 2016
6
0
1
33
Hi all,

I have just bought fx6 fluval filter. It starts for a minute as the manual suggests and then stops for 2 minute. After that it starts for just a minute and stops again. I thought it should be working after a pause of 2 minute. But it runs after 12 or 13 minute for 1 minute then again shuts off. Is there any mistake I am making? Please help me out.
 

nossalucard

Candiru
MFK Member
Jan 3, 2015
267
75
46
North Carolina
Is it constantly blowing micro bubbles in the water when it's running?

If it's cycling that often to purge air, it sound like you might not have it sealed correctly maybe? Have you disassembled and reassembled/checked for leaks yet?

Having it packed too full of media can cause issues as well. Are you using anything other than the stock media? If in doubt, I would try that as a troubleshooting measure, at least as just a test....
 

Anil Dongol

Feeder Fish
MFK Member
Oct 30, 2016
6
0
1
33
Thanks for the reply. When its running it does not produces any bubbles. Currently it runs for 40 second after almost 12 minutes. I have also checked leakages and also havent packed the stock media too full.
 

Anil Dongol

Feeder Fish
MFK Member
Oct 30, 2016
6
0
1
33
It was a voltage issue. Voltage standard in US and other countries might be different.It had 120v motor and didnt work in 220v.
 

Anil Dongol

Feeder Fish
MFK Member
Oct 30, 2016
6
0
1
33
Thanks. Filter is bought from US and Im in nepal thats why its not working without converter.
 
zoomed.com
hikariusa.com
aqaimports.com
Store