Glass Thickness for New Aquarium.

DN328

Goliath Tigerfish
MFK Member
Aug 14, 2014
2,418
1,098
179
Fish Tank
Hello Guys,

I have a 16" Silver Arowana, Shortbody Flowerhorn, 2 Oscars, 4 Blood Parrot and few loaches in 150 Gallon tank. But as the fishes are growing up, I am planning to upgrade my aquarium to a 300 Gallon setup. The dimensions are 78 L X 30 W X 36 H. I asked my local fish store for the rough cost and they told me it will cost me around $1000 for the whole aquarium with 19 mm glass, sump and media, cabinet, stand, lights etc. Front glass will be extra clear and rest will be normal glass.

After finding out the cost I am rethinking about my ambitious plan to upgrade my tank as I am also thinking to just give away the big fishes. But I asked few more shopkeepers to be sure about the cost and few of them told me that for the tank size 12mm glass (non tempered) with strong bracing will be good enough. I am confused as the tank cost significantly reduces if I order 12mm glass but I dont want to compromise with the safety too, as I saw few tank busting videos on youtube recently.

Is it possible to use 12 mm glass (non tempered) for the dimensions mentioned above. Also if not then please suggest me any changes in dimensions so 12 mm glass can be used.

Regards,
Additya
I would go with 36" W if you you have room. 36" H will be difficult to work with. I have 28" H and would not go beyond that. As mentioned above, it all depends on the additional bracing. Will it be rimless with eurobrace, or have non-glass bracing around the perimeter plastic bracing?
 
  • Like
Reactions: Addi_13

Addi_13

Exodon
MFK Member
Oct 5, 2016
66
17
23
I would go with 36" W if you you have room. 36" H will be difficult to work with. I have 28" H and would not go beyond that. As mentioned above, it all depends on the additional bracing. Will it be rimless with eurobrace, or have non-glass bracing around the perimeter plastic bracing?
DN 328, I do not know which is better bracing. I just contacted my local fish shop, the guy says he will need 6" height for bracing with additional bottom bracing/support as well.

I am thinking of going with 78" L X 34" W X 30" H now but I am also using 15 mm non tempered glass now. Do you think that dimensions will work with 15 mm or reduce the width/depth back to 30"? Also I checked the safety factor with 15 mm is around 3.2 with 78" L X 34" W X 30" H dimensions.
 

DN328

Goliath Tigerfish
MFK Member
Aug 14, 2014
2,418
1,098
179
Fish Tank
What you need to ask the lfs is what type of bracing they apply. Im curious why 6" is required. Im not suggesting which bracing is better, BUT, you need to ask the lfs more questions on what bracing. Also, as far as Im aware, bracing design also plays a part in safety factor and not just glass thickness.

My tank is 72x30x28H as reference with 12mm non-tempered starphire glass on both length sides and one end. 12mm 4" Eurobrace on top and bottom perimeter with 2 12mm, 4" wide cross brace.

Although water depth isnt as important, I like having a few more inches of water. Also, some folks drop their water level by a few inches, so you should factor that in.
 

Addi_13

Exodon
MFK Member
Oct 5, 2016
66
17
23
Hello DN328 and Everyone,

I have finalised the tank today and payed advance to the LFS guy. My final dimensions are 78" L X 32" D X 27" H (After Bracing) and it will have thickness of 15 mm glass with front glass, Starphire glass. The guy is using 5" for bracing and he will be using 19 mm thick glass just for bracing. I still do not know what type of bracing it will be but since I am an Architect, I have made some basic sketch of my aquarium as per my understanding of LFS guy. The same bracing will be on top and bottom. (I have kept the bottom section of tank with the bracing and covered the rest with sand so bracing is clearly visible to you.)

The sketch contains pictures of both dimensions and bracing so you'll get a better understanding. Also I have attached it without dimensions too and few pics with lady inside it so you'll get an idea of the size. Have fun and let me know if my dimensions and glass will be okay and safe now. The safety factor is 3.92 or almost 4 now with 15 mm glass and hope bracing will make it above 5. The aquarium will be around 1100 litres or 292 US Gallons. There will be a 4' sump with 4 partitions at the bottom with 3000 gph or more pump and all the media like ceramic rings, bio balls, sponges, activated carbon . The aquarium is costing me around $1000 USD with everything like lights, cabinet, stand etc.

Thanks and Kind Regards,
Additya

1.png

2.png

3.png

4.png

5.png

6.png

7.png

9.png

10.png

11.png

12.png

13.png

14.png

15.png

8.png
 
Last edited:
  • Like
Reactions: Drstrangelove

Fish Tank Travis

Potamotrygon
MFK Member
Feb 28, 2016
3,277
2,158
164
36
Dayton, OH
Hello DN328 and Everyone,

I have finalised the tank today and payed advance to the LFS guy. My final dimensions are 78" L X 32" D X 27" H (After Bracing) and it will have thickness of 15 mm glass with front glass, Starphire glass. The guy is using 5" for bracing and he will be using 19 mm thick glass just for bracing. I still do not know what type of bracing it will be but since I am an Architect, I have made some basic sketch of my aquarium as per my understanding of LFS guy. The same bracing will be on top and bottom. (I have kept the bottom section of tank with the bracing and covered the rest with sand so bracing is clearly visible to you.)

The sketch contains pictures of both dimensions and bracing so you'll get a better understanding. Also I have attached it without dimensions too and few pics with lady inside it so you'll get an idea of the size. Have fun and let me know if my dimensions and glass will be okay and safe now. The safety factor is 3.92 or almost 4 now with 15 mm glass and hope bracing will make it above 5. The aquarium will be around 1100 litres or 292 US Gallons. There will be a 4' sump with 4 partitions at the bottom with 3000 gph or more pump and all the media like ceramic rings, bio balls, sponges, activated carbon . The aquarium is costing me around $1000 USD with everything like lights, cabinet, stand etc.

Thanks and Kind Regards,
Additya

View attachment 1243765

View attachment 1243766

View attachment 1243767

View attachment 1243768

View attachment 1243769

View attachment 1243770

View attachment 1243771

View attachment 1243772

View attachment 1243773

View attachment 1243774

View attachment 1243775

View attachment 1243776

View attachment 1243777

View attachment 1243778

View attachment 1243779
I definitely don't understand why the bracing is lowered 6" into the tank. It will perform the same function 6" higher at the top of the tank, and then you get more height in the tank.
 
  • Like
Reactions: Addi_13

DN328

Goliath Tigerfish
MFK Member
Aug 14, 2014
2,418
1,098
179
Fish Tank
Addi_13 - I think the lady is too big for that size tank LOL ;-)

Joking aside, I tend to agree with Travis - why is the Euro-brace 6" down from the top edge of the tank? Other than that, I think the euro-brace and cross bracing seems above standard given what I've read in the past. Here's a picture, albeit not great, of how the my top bracing looks. My builder ended up moving the cross bracing on top of the euro-brace rather than attaching edge of the brace to edge of the euro-brace.

upload_2017-4-3_20-51-38.png
 
  • Like
Reactions: Addi_13

Addi_13

Exodon
MFK Member
Oct 5, 2016
66
17
23
If a fat lady can fit in there then a fat arowana will easily live a Happy Life :D.
And yes i am now confused too, I might tell him to just use 4" maximum for bracing. Also please suggest and advise now whether the glass thickness for the dimensions will be okay?


Wow man your tank looks good but please share some full length pictures. Curious to see what kind of beats are lurking in there?

Regards,
Additya
 

DN328

Goliath Tigerfish
MFK Member
Aug 14, 2014
2,418
1,098
179
Fish Tank
If a fat lady can fit in there then a fat arowana will easily live a Happy Life :D.
And yes i am now confused too, I might tell him to just use 4" maximum for bracing. Also please suggest and advise now whether the glass thickness for the dimensions will be okay?


Wow man your tank looks good but please share some full length pictures. Curious to see what kind of beats are lurking in there?

Regards,
Additya
Given your shared dimensions, I think your glass thickness is sufficient, imo. Mind you, I've never built my own tank that size, I had done some reading of this topic. I also would have no issues with him using the larger / thicker glass for bracing. Have you seen their work or read anything about the folks building.

I have only the Lei, couple BP, gold nugget / phantom plecos in the tank, thanks.
 
  • Like
Reactions: Addi_13

Addi_13

Exodon
MFK Member
Oct 5, 2016
66
17
23
Hello Guys,

I am happy to tell you that my project have started and LFS guy have just pasted the outer glasses yesterday. Again the final dimensions are 75" Length X 32" Depth X 32" Height. The front glass is starphire glass with 19 mm thickness and rest is 15 mm with normal glass. Here are some pictures, sorry the room is bit untidy. The guy asked me for a plyboard before making the aquarium but as I didn't had it he checked the level of the floor and used few newspapers, clothes and tape.

The stand and other material are getting ready. I am still confused about how to place light and the canopy(which material to use). The sump will be 48" L X 18" D and 16" H. Let me know guys what you think, any suggestions or advise will be really helpful. Will this be considered as a monster tank? Btw thats my current 4 feet tank in the background which looks so small in comparison now.

Regards,
Additya

20170414_223508.jpg

20170415_193659.jpg

20170415_193712.jpg

20170415_001206.jpg

20170415_001253.jpg

20170415_001403.jpg

20170415_193607.jpg

20170415_193732.jpg

20170415_193816.jpg
 

CaptainBirdsEye

Feeder Fish
MFK Member
My tank is only just smaller than this, 1000 litre on paper.
I used 12mm all around. It is 64"x 33 &1/2" x 28"
Not much different, the braces are only 1&1/2" into the top.
Braces are 4" 12mm.
Base is twin skin 12mm.
Running for well over 6 years...... No leaks or bursts!
I designed and built it myself.

image.jpg
 
  • Like
Reactions: Addi_13
zoomed.com
hikariusa.com
aqaimports.com
Store