IT HAS BEGUN MUAHAHAHAH

[HiGhTiMeZ]

went from page 1 to page 20... and i have to say
ITS LOOKING FREAKING AWESOME MILKMAN!!!!!
good job man! thanks for sharing this project step by step!
and i know u, ur not one of those that gets depressed over negative comments!
so..... keep it coming bro!!!! rOck On!

 

[milkman407]

Well, the tank is 400 lbs than you got all that water jeeez, im gona be a lil scared to go under the tank when i set my w.d up lmao.

I will have more pics today.

 

[WyldFya]

Personally I would have tested for leaks before drilling the overflows. That way if there was a leak, you wouldn't have to worry about the weak points.

Looks really good so far. Can't wait to see it up and running.

 

[rayman45]

PICSSSSSSSSSS

 

[Gr8KarmaSF]

keep it up milk!

 

[dapike1979]

Keep the pic's rolling!! Good job!

 

[rayman45]

 

[milkman407]

We havent drilled it yet, we bought bulkheads though, we have a 1 1/2 " overflow and the return is like 3/4 but is being pumped by a uv sterlizer. We wont drill the holes untill the tank is routered, we have the canopy done, the stand finished and we tested for leaks. than we will drill.

 

[milkman407]

Dident do anything tonight dad got home at 5:00 and we got home from the store after dark. sorry.


Whats in the box????? you will find out after the tanks done.

 

[midnight]

we bought bulkheads though, we have a 1 1/2 " overflow and the return is like 3/4

why do you ask questions and not listen?
everyone said to get 2" or bigger.
i have one 1" overflow with one 3/4" return on my 90 gallon!
and its almost not enough flow.and im only pumping 250gph,and the water is over the bulks.
return them and go bigger while you still can.
or dont,not my tank.