NEW MONSTER : Another Monster Journey : Setting Up Monster 600 Gallon

[flamenco-t]

I am getting my exact size tank in 3-4 weeks from tenecor.

Thank you for doing this before me and the ultima filter is a great idea. I have been dreaded on setting up a big wet dry due to the noise and smell (wifey hates the noise) I even was going to set them up OUTSIDE and run a bulkheads through the walls.

As of the back of your tank, are you using one of the reeflo for closed loops ?

stan

 

[fishguts]

that setup is sick man. awesome tank!!!!

 

[neoprodigy]

I am getting my exact size tank in 3-4 weeks from tenecor.

Thank you for doing this before me and the ultima filter is a great idea. I have been dreaded on setting up a big wet dry due to the noise and smell (wifey hates the noise) I even was going to set them up OUTSIDE and run a bulkheads through the walls.

As of the back of your tank, are you using one of the reeflo for closed loops ?

stan

1 reeflo hammerhead... i love the close loop... no slurping sound of the wetdry....

 

[nitrofish1]

1 reeflo hammerhead... i love the close loop... no slurping sound of the wetdry....

is that closed loop a DIY thing?

 

[neoprodigy]

is that closed loop a DIY thing?

which part?

 

[nitrofish1]

which part?

umm im not exactly sure lol. im just asking you if the closed loop was a DIY thing to eliminate the noise, cuz ive seen some loud wet/dry systems, and quiet = happy family.

 

[neoprodigy]

umm im not exactly sure lol. im just asking you if the closed loop was a DIY thing to eliminate the noise, cuz ive seen some loud wet/dry systems, and quiet = happy family.

close loop = canister type of setup....

close loop = no wetdry

 

[nitrofish1]

ok. thanks

 

[flamenco-t]

The closed loop I was referring to was for extra flows around the tank.

You usually have 1 incoming to the pump and the outlet of the pump into 2 outlets on the tank.

Were the 5- 2" bulkheads used for drain and return ONLY ?

My overflow is a peninsula type overflow on one side of the tank only. The tank is viewable from the 2 long sides (room divider), so I need to figure out a way to eliminate dead spaces on the other side of the tank.

Can you show me how you route your plumbing please ?

Thanks sir

stan

 

[neoprodigy]

The closed loop I was referring to was for extra flows around the tank.

You usually have 1 incoming to the pump and the outlet of the pump into 2 outlets on the tank.

Were the 5- 2" bulkheads used for drain and return ONLY ?

My overflow is a peninsula type overflow on one side of the tank only. The tank is viewable from the 2 long sides (room divider), so I need to figure out a way to eliminate dead spaces on the other side of the tank.

Can you show me how you route your plumbing please ?

Thanks sir

stan

5 bulkheads - 2 return, 2 drain and 1 for new water dripping..

I will draw a plan up this weekend...



Posted via Mobile Device