heater is working well but the bulk head i tried to shorten is leaking so will have to buy a new 1" bulk head and get it fixed.
new sump set up
- Thread starter those1
- Start date
liking this. im studying sump filters as ill be looking to upgrade my tank sometime in the future. Nice fish room BTW
Where did you get the heating element? Im thinking about doing away with the jagers.
Sent from my iPhone using MonsterAquariaNetwork app
bulk head replaced leak stopped so all is working again. I tried hooking up drip emitters to my drip system but the leak horribly has anyone else had this issue. Its not the hole in the hose where the emmiter sticks in but the emitter its self leaks at its seam. I tested 4 of the 10 that came in the package and they all do it.
Did u try tightening them up with pliers? I had the same problem with the emitters i purchaced but was able to tighten em until they stopped leaking. I also had a few in my batches that wouldnt drip at all. Probably why most of the emitters are very cheap to buy.
Sent from my SAMSUNG-SGH-I747 using MonsterAquariaNetwork App
I have not tried that. sorry been so long since i posted. Had a christmas flood in my basement. out sump pump for ground water got caught on the wall and decided to no turn on allowing 3" of water to fill up the whole basement
