Proposed "L" Shape DIY project
- Thread starter LondonDragon
- Start date
I would go for the L shape tank, sure it hasn't got the maximum water volumn you could have but it is more pleasing to the eye.
amehel0;804458; said:
Hi, its pretty simple once you figure out how it works. You have to draw a circle, then from the center point draw a line and drag using the pull tool along the line.
Here is an example:
First the circle and line is drawn:
then you select the
toolThen with the tool click on the cicle:
Pull it along the line:
Carry on downwards, and it draws the pipe
Off course you can draw the line in any shape you want, you can use the round tool to make perfect round turns on pipes. Just make sure you draw the entire line of the pipe you want to use before you pull it.
Hope that helps
Anything else just ask
Lil_Stinker;824867; said:
Project is on hold at the moment, other stuff came up and this just as got to wait
Bummer man....I hate it when life gets in the way.
Hope all werks out for ya and you kin git back on this project.
Hope all werks out for ya and you kin git back on this project.
I will get back to it thats for sure, but there are other priorities at the moment.
So this might be on hold for a while still life is a b**** sometimes!
So this might be on hold for a while still
life is a b**** sometimes!