Quick All GLASS aquariun silicone Question

  • We are currently upgrading MFK. thanks! -neo
nono i wanna know if the one tube of aquarium stuff is going to be enough to put the sides and front on around the base when doing 3/16 bead
 
This to put the paynes together ---3/16 bead --- only have ONE tube of this stuff... will this one tube be able to assemble all paynes doing a 3/16 bead you think?
img3039904.jpg


And this for the INSIDE seams and braces
077027401202.jpg
 
its probly not going to be enough... ITS THE SAME PRODUCT, so it doesnt matter..., you have enough to do the whole tanks with 5 tubes..., first you run a bead on the paynes assemble, and once its put together. you need to apply more silicone to the inside and smoth it out.pressing the silicone into the joint where the two pieces meet... and its at this voint that goes along the inside of the tank that i recomend taping off 1/4" on each side...
 
also arent i suppose to run the bead kind of like this and then stick the glass paynes together i thought your not suppose to smooth it out(i wouldnt run it that thick tho)
Pacu20800020Glazing20windows203710.jpg
 
i just figured the taping off part out by myself :):) so i got that covered now all i need to know is if 3/16 bead will be strong enough to hold the paynes together and also the siliconing pic above leaving it in a straight globb then attach the glass leaving a 1/8" space between the paynes(of course that 1/8" space is filled with silicone but u get wut i mean) but is that how its done?
 
alright bro when u get back leave me some answerd to those posts ill be back on tomorrow tho so ill ttyt cant keep my eyes open lol they burn
 
You must log in or register to reply here.
MonsterFishKeepers.com
Top Bottom