Yeah - it should. But depends on how often the lid is open & how large any holes are.
Well depending on the dimensions - a 10,000 gal pond/lagoon might be ok of a Bonnethead. But IMPO this would considered near minimum for a single adult Bonnethead
Shark pond?
- Thread starter Roflcopter
- Start date
Yeah - it should. But depends on how often the lid is open & how large any holes are.
Well depending on the dimensions - a 10,000 gal pond/lagoon might be ok of a Bonnethead. But IMPO this would considered near minimum for a single adult Bonnethead
Im am guessing but I think that tank in the store is something like 8' x 12' and about 2 feet deep. And a lid on a pond only works is you never want to view the animals inside. Unless you make a clear plexi lid but then if your pond is huge like this one I don't see how it would work.
A lid will also stop the oxygen exchange which is not very good for the inhabitants. So if your going with a lid make sure to drill some holes into the top.
O i c. Ponds seem rather simple i dont no how big hes planning but im building a 480 and i think it will take about a weekend
Just a thought. Are there any laws stopping us from building an outdoor shark pond in either Canada or America?
Well - I could make comments about the Unsuitability of Bonnetheads for home aquaria.
But I'll just leave it at - unless you have a pond/lagoon that has the space & gallonage of a moderate size above ground swimming pool (at least 6,000 -10,000 gallons) - Don't even try it.
But I'll just leave it at - unless you have a pond/lagoon that has the space & gallonage of a moderate size above ground swimming pool (at least 6,000 -10,000 gallons) - Don't even try it.
