Crazy thing is it’s already 4 to 5 inch braced on the insideYou're kindda stuck if you need the water level for the overflow. Sounds like you need some kind of splash screen or silicone a glass brace.View attachment 1413874
Crazy thing is it’s already 4 to 5 inch braced on the insideYou're kindda stuck if you need the water level for the overflow. Sounds like you need some kind of splash screen or silicone a glass brace.View attachment 1413874
this tank is over 400 gallons for 1 ray? Don’t think so.Is no one going to point out the obvious reason? That tank is way too small for the ray. Rays are able to normally spit water thats how they in hale food. Put that ray in a taller tank and problem solved. That ray is bigger than the tank in height.
I am referring to the height. 400 gallons is good, but when the tank is 18 inches tall. And you disc size is 18 inches....
[/
Could be taller but, I’m not sure how that stops water from going 2 feet higher than the tank.
Fair enough, need better lids is the bottom line.Think of it this way. Someone’s is trying to make a fountain with a single water pump. He puts at at the bottom of the pond, but there’s only motion on the surface, no water spray. He later puts the pump right under the surface, a spray of water comes out.
I don’t know why your ray is doing it, since your footprint is good and I don’t think it’s going for food. To stop the water going on your ceiling, cover up the holes on the cover so water can’t get in your ceiling. This is what I did to stop evaporation from my nano tanks that don’t have a good lid.