Thinking of building a bio tower. Need some help.

  • We are currently upgrading MFK. thanks! -neo
DB junkie;2652496; said:
How tall is your tank? Most of mine have 5 foot of head. You're allready that high what's another foot? Most decent pumps will pump over 10.

Still curious as to what you plan on stocking. :confused:

If I do this Large scale on my big tnak first. It's almost 600 gallon w/out sump volume. and the top of the tank is about 6' high. I can only go 7' b/c of the celieng. And stocking is right now.

1-32" niger cat
1-26"+ silver aro
1-22"+ RTCxTSN
1-13" fei feng
1-12" marble cat

and future stocking sill be hopefully....

3 more 26"+ silvers. (going to be hard to find)
1 more big cat. Undecided
and maye a Large black wolf or two.

Dr Joe;2652812; said:
koop171, I forgot to mention the pipe. Look for a commercial plumber and wastewater contractor in your area, they may have the odd piece of PVC you can pick up cheap for cash. I've picked up scrap 4' & 6' 6"-16" pieces from new subdivision and mall construction free.

Dr Joe

.

I have seen this stuff laying around town last year b/c they did alot of waterline work. And my parent live next door to a plumber so I should try him. Thanks for that Joe.

RBE17;2653016; said:
CL for pipe and barrels. You might want to try usplastics, tankdepot and plasticmart for tanks. They might have what you want.

I'll check them out.

Dr Joe;2654746; said:
Ok, a single cell Bakki shower then :ROFL:.

LOL if that limits confusion. lol
 
John how exatly does a self starting syphon work? I'm unfamiliar with this. sounds like a sloid idea. but how to do it I have no idea. I am going to head to the hardware store to see if they can get large PVC. I do not need clear. however it would look cool.
 
koop171;2656824; said:
John how exatly does a self starting syphon work? I'm unfamiliar with this. sounds like a sloid idea. but how to do it I have no idea. I am going to head to the hardware store to see if they can get large PVC. I do not need clear. however it would look cool.

you may find the clear fiberglass cheaper in these sizes

will post a drawing of the barrels.....basic idea

barrel.jpg
 
John...even cave dwellers had a few colors! :ROFL:(tho there is a resemblance).
 
lol I think I get the general idea. seems simple enough. I think I want to do a 12" tube now I did a really rough estimant of a 16"x7' and the gallonage is to high. if something fails at that size it would overflow my sump but at 12" I should have plenty of extra room to cover any failures.
 
koop171;2658905; said:
lol I think I get the general idea. seems simple enough. I think I want to do a 12" tube now I did a really rough estimant of a 16"x7' and the gallonage is to high. if something fails at that size it would overflow my sump but at 12" I should have plenty of extra room to cover any failures.


bio tower ??? no failure mood :)
 
koop171;2658905; said:
lol I think I get the general idea. seems simple enough. I think I want to do a 12" tube now I did a really rough estimant of a 16"x7' and the gallonage is to high. if something fails at that size it would overflow my sump but at 12" I should have plenty of extra room to cover any failures.

I don't think you have a total grasp on the Bio tower. You don't fill a bio-tower, it's just a flow thru, bottom end is open into the sump (80% ~ air) (so a failure of the sump return would result in the tower recirculating the sump). 7' x 16" maybe 20g of water suspended, depending on pump gph (didn't do the math).

Dr Joe

.
 
MonsterFishKeepers.com