Keep your chin up man, Its a "small" set back in the scheme of this build and you'll fix it I'm sure. Don't be hard on yourself...
My new 2600 gallon plywood tank project
- Thread starter VLDesign
- Start date
Showin the MFK love and fixin the problem in a Manly way 
Epoxy arrived today.
Timeline:
Tues - Will start with the thicker epoxy tomorrow after work, then if it hardens fast enough I will get a first layer of Max ACR down as well.
Wed - 2nd Coat of MAX ACR, and 2 layers of fiberglass and MAX ACR
Thurs - Final coat of Max ACR
Sun - Install windows
Leak test should happen around the 21st
Timeline:
Tues - Will start with the thicker epoxy tomorrow after work, then if it hardens fast enough I will get a first layer of Max ACR down as well.
Wed - 2nd Coat of MAX ACR, and 2 layers of fiberglass and MAX ACR
Thurs - Final coat of Max ACR
Sun - Install windows
Leak test should happen around the 21st
A true inspiration to all fish keepers and tank builders alike.!!
Your Monster tank builds and advice im sure has helped many in there own DIY tank builds
Best of luck in the finishing stages and cant wait to see the finished stocked tank
Your Monster tank builds and advice im sure has helped many in there own DIY tank builds
Best of luck in the finishing stages and cant wait to see the finished stocked tank
I think you'll be glad your covering your tank with fiberglass. I did it that way for my 450 gallon. I put 3 layers of fiberglass and 4 layers of sweetwater. I didn't put fiberglass in the corners though. I just put silicone in the corners and they held great. My first test fill, no leaks. I have had my tank up and running now for 6 month and not a single leak or problem. Good luck in finishing. I really hope you don't have anymore problems.
