Time to try a wooden aquarium
Thanks, That was my first project with hardwood last month. I fell in love with birch plywood building that. I am not finished with it, because during that project I realized that I could build the aquarium that I have been thinking about for the last 10 months. So first of the year I picked out some hard wood for my aquarium total spur of the moment. I actually went to the hard wood store to get some advise on how to put a router in the table and came home with 10' maple. Maybe someday I will finish the workbench.
I used clear so I could inspect the seams. Everything looks good with the exception of this one 3 inch area. Problem? I planned to double layer the fiberglass.
I should if reviewd Joey's video on this. I did a 2" overlap vs 2 " strip. Not a major mistake, but it sucked up a lot of epoxy, and the wider strip was a little harder to possition. The other mistake I made was trying the push it as the epoxy was setting. This is how that bubble formed.
Us composites sells a nice corner fiberglass that made that part way easier than I expected. Looks like you handled it nicely though!
