On my screen, the ruler in the pic ruler is 37 mm. The fish is 115 mm. If the ruler is exactly 12", this makes the fish 37". I agree with Bassfisher91 - the poster appears to be a serious, earnest monster-fish keeper and an honest seller.
Everything I'm reading says 24". Even planet catfish says 19.7"
Sent from my iPhone using MonsterAquariaNetwork app
In the thread previously posted another guy said his was over 26".
I don't exactly how you did your math but just by looking you can the cat is twice the length of the ruler even at that angle. If it was 37" the ruler would be a third of the fish. I honestly don't even think tigs exceed 30"
3 feedback scores? I dont think so...SCAM!!!!!
I measured the '12" ruler' in the pic (by putting my ruler next to the '12" ruler' on the screen) and then measured the length of the cat (by putting my ruler next to the fish on the screen). Multiply the ratio by 12" and get the result. If you do that, what do you get?
I tend to agree with you as a 3' tig is rather unheard of, but one cannot fight the evidence presented, short of going to Tampa and measuring for yourself.
"Even" is not applicable to PCF. It is the opposite. They are very strict and conservative and careful when it comes to measurements. Clear and firm evidence is absolutely needed for PCF to update the max size and most usually, someone needs to champion it and put effort into it, unless it comes from a trustworthy scientific publication.
Ive been trying to get my hands on a juvie for awhile now... no luck
Everything I'm reading says 24". Even planet catfish says 19.7"