400 gallon plywood build

  • We are currently upgrading MFK. thanks! -neo
Ran into a small snag. I wanted to do 6 coats but I do not have enough activator to mix with the paint. The can states a 3:1 mix ratio. Which is what I followed. After noticing I was almost out I checked out the Aquatic Eco Systems website and they list a 4:1 mix ratio, which would work out right based on the paint I have left. I sent them an email but will not here back till Tuesday or so with the holiday. I can order activator but with the hazmat fee it came to $67 shipped.
 
I always had in mind doing a ply tank of this size. About how much did the first order of Epoxy cost you?
 
chico3611;3435550; said:
I always had in mind doing a ply tank of this size. About how much did the first order of Epoxy cost you?
It was $177 for 2 gallons shipped to my house.
 
I heard back on the activator and they said it should be 3:1 ratio. I talked to 2 different people and got 2 different responses. The bottom line is they offered to give me a dented can of activator if I just pay shipping. Which was only $9. I said ok and it should be here on Monday. I ended up doing 5 coats and calling it good. I installed the glass last night and siliconed all the seams 3 nights ago. Currently working on the plumbing. I picked up a 90 gallon for the sump. Here are a few pics with the glass in.

100_2826.jpg

100_2829.jpg

100_2830.jpg
 
jeepn4x4;3429617; said:
here is the second coat. Now just waiting for third coat to set up so I can start the fourth coat.

Great looking build mate, is the sweet water easy to apply?
Did you use fibre glass tape for the seams?
I would go with a sump for filtration, I run a 4x2x2 sump and a sand filter but my 500g has different stock to yours.
 
MonsterFishKeepers.com