I shouldn't have said they cover $40 per month in electricity. I meant to say I pay my full bill every month, but $40 of it is built into the rent. Unfortunately, they somehow don't deliver power bills, so if I go under my $40/month, they somehow keep the leftover money. They have been handing out electric overages like hotcakes lately though. That means my $535/month rent has more charges when I have to pay rent. It sucks! Anyone thinking of going to school at USF in Tampa should avoid On50 apartments! The buildings are atrocious, the management and maintenance are rather hostile, and its expensive! This is the ONLY apartment near camps that does not have a bathroom in every bedroom, and charges extra if you get a bathroom in your room! BLEGH! Anyway, I have unlimited water use in my apartment. It does not specifically say no fish tanks, but it does have some sort of weird pet clause in there. I don't want to know the finer points because I've caused enough trouble around here. If I start raising questions about pets, they'll come looking and raise some sort of hell with me, undoubtedly. But they did tell me that I need to keep my tank as a hobby, not as a business. They said if I raise fish and sell them on a regular basis, they'll be unhappy. They also mentioned cleanliness because of health concerns. They don't want to see mold and mildew and any other possible nasty in the tank that could get into the air. Furthermore, they don't like the humidity associated with it.
O yea, one final note: The load on the floor due to the tank is not an issue on the structure. Buildings are designed nowadays using LRFD methods: Load Resistance Factor Design. There are safety factors assigned to the loads on the structure and to the strengths of the materials. They assume the material is weaker than it actually is, and then assume loads are greater than they actually are. The loads are usually found for design purposes as follows: 1.2DL + 1.6LL, or 1.4DL, or some other variation, based on wind loading or seismic loading. DL stands for Dead Load, and accounts for loads brought about by walls, ceilings, floors, plumbing, electrical components, etc (anything that will stay constant on the structure, no matter what). LL, or Live Loads, account for things such as people, furniture, carpet/tile, fish tanks, lighting, etc (anything that is relatively easily changed within the structure). As you can see by the factors associated with these items, we can get a pretty good guess at the loads due to the structure itself, and assume little variation during construction. However, when guessing at what people will do to the building when decorating and living in it, we clearly don't know as much. It's pretty uncertain. I believe residential structures are designed with a LL capacity of ~ 20 lb/sq. ft. I can assure you that although my fish tanks weighs over 500 lbs, the structure has no problem supporting it. There is very little around in this apartment that adds to the Live Load in question. (In case you didn't know, I'm studying to become a structural engineer, and I'm 1 semester away form getting my BSCE. I'll be staying on here for another 2-3 years to get my MSCE in geotechnical engineering!)