Building a 9'x25' pond
- Thread starter mrunlucky07
- Start date
WTG mrunlucky07 you ae a genious and a scolor ( sorry my spelling stinks). You have done a wonderful job on your pond and all the other stuff you build. Great job keep up the great work.
Sorry to bother you all but have a fast question if a tank measures 3' long X 17" high X 12" wide how many gallons is it. Aswell would it be the same measuerments in Canada as it is in the States?
School let out last week so I took advantage and kicked the summer off with a week camping. It was a change of pace with no internet and playing with the ponds, but I did come home with some inhabitants the new pond
It was a very relaxing week of kayking and gave me some new idea for the ponds as well.
Today I got back to ponding and trimed the top of the timber pond with 2x6s and decided to tile the top perimeter of the pond. It was not part of the original plan, but I was unhappy with the transition of the liner and above water landscape timbers. So now the turtles have a tiled bathroom while mine is just linoleum
I have never worked with tile before so cutting it was a new experience. I don't have a scribe, so found out an angle grinder and careful cracking will do. Keeping everything in place was a little tricky too until I worked out a system. Hopefully it holds! Tomorrw the adhesive should be fully set and I can refill it and begin staining.
It was a very relaxing week of kayking and gave me some new idea for the ponds as well. Today I got back to ponding and trimed the top of the timber pond with 2x6s and decided to tile the top perimeter of the pond. It was not part of the original plan, but I was unhappy with the transition of the liner and above water landscape timbers. So now the turtles have a tiled bathroom while mine is just linoleum
I have never worked with tile before so cutting it was a new experience. I don't have a scribe, so found out an angle grinder and careful cracking will do. Keeping everything in place was a little tricky too until I worked out a system. Hopefully it holds! Tomorrw the adhesive should be fully set and I can refill it and begin staining.
