Camshaft's New Fish Room/DIY 55 gallon Sump (Load Warn.)

  • We are currently upgrading MFK. thanks! -neo
Phatty phat Camrod... The 300 is lookin great. Although Im not sure you have enough bioballs. :screwy:Thats a sweet piece of Driftwood ya got in there. I thought I had some big pieces but ya got me... I hope your srt is fertile too so I can snag some of the fry...:D... You ever try breeding your JK with anything? That 240 is super dope brudda.
 
beantickler;2311876; said:
Phatty phat Camrod... The 300 is lookin great. Although Im not sure you have enough bioballs. :screwy:Thats a sweet piece of Driftwood ya got in there. I thought I had some big pieces but ya got me... I hope your srt is fertile too so I can snag some of the fry...:D... You ever try breeding your JK with anything? That 240 is super dope brudda.
Click to expand...

Yeah, the driftwood is big. It's two peices. The big one is 6 feet long and a foot thick in the middle. They were cooked in a kiln. I got them at a reptile convention for $200. 3 years later and they still float...
I never really ever considered breading my JK. He's a horny little bugger. That's for sure.
 
cupfishhead;2314141; said:
Where did you find the top drip tray??? I've been looking for something better then the quater inch light covers for my sump.
Click to expand...

I made the drip tray. Go to Lowes. They sell sheets of the material for about $10. just cut it to shape and sealed it all together. And above that are just acrylic sheets cut to fit the top. I got those from Home Depot.
But, if you do need to get acrylic sheets, find an acrylic shop in your area. It's way cheaper than Home depot.
 
Camshaft Ramrod;2314501; said:
I made the drip tray. Go to Lowes. They sell sheets of the material for about $10. just cut it to shape and sealed it all together. And above that are just acrylic sheets cut to fit the top. I got those from Home Depot.
But, if you do need to get acrylic sheets, find an acrylic shop in your area. It's way cheaper than Home depot.
Click to expand...
and they have Acrylite which is cell cast...
;);)
 
Quick update.
Have all of the pots (4), plants and driftwood in place for breeding now.
And the tank has been holding with no leaks. (knock on wood)
My SRT and Carpintis have had eggs twice now with no luck. They eat
them after a day or so. But I haven't seen them turn white yet. So fingers crossed.
I've added 3 red fin prochelotus for target fish also. They aren't in the pic though.


DSCN5135.JPG
 
Thanks man.

Next I'm going to airbrush the cement columns with bright colored, aquatic murals.
It should look tight as hell. Some tell me I should cover up the front, but I like
to show off my undergoodies.
 
You must log in or register to reply here.
MonsterFishKeepers.com
Top Bottom