I think an often underappreciated part of the community is answering specific questions that any level of fishkeeper might need. When it comes to tech specs and questions
D
deeda
has long been an integral part of the community, particularly related to Eheim products. Most significantly, in my opinion, is the consistency with which the dedication was displayed. Years of helpful tech info, diagnosing user's problems who might be unaware of it and always willing to help get to the root of a problem. I intend to do some more digging but I feel like for this level of reward and the work put in it's sort of a no brainer.
Help ID this Eheim
Hey guys! A buddy of mine just bought himself an eheim "pro 3". When he showed me it i knew he got scammed because the lid only said " eheim professional " with no 3 on it. So now im trying to find out what model it is for him so he can see if its at least ok for his 120g. All we know for sure...
www.monsterfishkeepers.com
Eheim Universal 1262 pump leaking
Pump leaks between holding ring and pump cover with bushing. Sealing ring is ok. I lube it, and again leaks. Pump is 2 years old. It is on Eheim canister 2060. Do You know what is problem? http://www.eheimspares.co.uk/eheim_1260_1262_universal_pump.php Thanks for reply.
www.monsterfishkeepers.com
What media to put in my Eheim 2262 for RES turtles
I bought the tank and stand off Craig's List. They are both 6' long by 18" wide, or closer to 19" if you count the outside of the glass. The stand is about 29" high, the tank about 22" high. The stand disassembled into pieces, and because it had been in a shed for a few years, I scrubbed it...
www.monsterfishkeepers.com
Eheim canister emergency parts
What parts should i have on hand just in case something fail? What other parts is good to have on hand? i only know i must have an extra bushing shaft on hand.
www.monsterfishkeepers.com
Eheim 2217
Guys I new to find the spray bar attachment for the 2217 I have the straight bar but I need the elbow. I have it set up on a 55 and I didnt fit accross the width of the tank so I set it up vertically but now want to move it to a bigger tank and set it up horizontally all I can find is the...
www.monsterfishkeepers.com
Eheim 2229 wet dry issue
Hope everyone is doing fine. Anyone ever just take that stupid wet dry tower mod off and plug the holes up? The small top on and the approximate 1.5" hole on bottom? I can't get the thing to stop leaking.
www.monsterfishkeepers.com