if you get the white flexible pvc hose, then you WILL need glue. Its just like pvc yet flexible.
You cant get it with everything already attached? I didnt make it out there tonight so should be tomorrow.
if you get the white flexible pvc hose, then you WILL need glue. Its just like pvc yet flexible.
You think I should make a spary bar to distribute the water over most of the length of the tank or just dump the water in all at once? I will be using a 3600GPH pump
Spray bar is really only good IMO if you have fish that don't like current. I would let it run straight in.
I would recommend using flexible pvc hose. They are sometimes called spa hose. It only cost a little more than the hard pipe. You can get them at Ewing Irrigation. It is very strong and will not fail. It does require a glue that is specifically made for it. Also, if you are concerned with the hard turns of elbows fittings, you can get the sweeping elbow that "Waterway" makes. The water will flow a lot better. The LFS should be able to get it if they don't have it in stock. It does cost a lot more than the HomeDepot stuff but you will only do it once. Good Luck.