How are you connecting it to your stand? Just get some sort of hooks with an adhesive?
Sexy Plumbing - Island Tank
- Thread starter JK47
- Start date
How are you connecting it to your stand? Just get some sort of hooks with an adhesive?
Just shorter screws than the ply thickness. You don’t want to penetrate the layer of wood or risk hitting the tank material.
Got the spill proof vinyl installed on the ply in the floor as well.
The floor is not sitting level so I need to get a fresh cutoff wheel and cut down whatever this was supposed to be. After that and fresh styro the stand is finished.
The floor is not sitting level so I need to get a fresh cutoff wheel and cut down whatever this was supposed to be. After that and fresh styro the stand is finished.
4th pic up from the bottom. What is the storage looking containers to the right in the background?
Stackable husky bins from Home Depot. They stack up and into each other to stow away into 36” high or so for 6-8.
Quick and easy privacy wall when friends are over too
Got that odd corner piece cut off the stand, floor inlaid and styro replaced.
x2 sheets 3/4” ply and
x1 3/4” styro.
Transferred the acrylic hole template to set the path vertically and follow that spacing throughout the build. It will be the center point reference and determines the width of the overflow boxes as well.
The widest part of any line is the union ball valve handles in a terminated position. 3/8” is about as tight as you can get them and not protrude on the side.
I bought this brand valve specifically for the handle width. Cepex is too wide.
Tank is on the stand now as well
x2 sheets 3/4” ply and
x1 3/4” styro.
Transferred the acrylic hole template to set the path vertically and follow that spacing throughout the build. It will be the center point reference and determines the width of the overflow boxes as well.
The widest part of any line is the union ball valve handles in a terminated position. 3/8” is about as tight as you can get them and not protrude on the side.
I bought this brand valve specifically for the handle width. Cepex is too wide.
Tank is on the stand now as well
Dropped in some of the hard scape and hosed everything out to get a quick visual of where this is headed. Almost a shame to cover up that floor with sand.
