XP6?

[rallysman]

What if I leave both motors running? Any harm?

*maybe I should run all 3 of them in a series! lol

 

[RadleyMiller]

What if I leave both motors running? Any harm?

*maybe I should run all 3 of them in a series! lol

I dunno Levi,

I think it might cause more backpressure and make the motors work harder if they are all running together.

 

[ammerman19]

I would not recommend doing that. It will make your motor try to draw more current and work harder creating more heat which will lead to a shorter life.

 

[ammerman19]

it will also make the solo pump work harder making it pull through two buckets of media

 

[RadleyMiller]

Maybe it would be easier to just run them independantly. That way you won't lose the whole tank if one filter fails.

Or just get a bunch of sponge filters and use them

 

[ewurm]

500+500+500=5000

Hahaha Ewurm you crack me up

Levi, why do you want to do that? Once it goes through the first it will catch all the debris. Is the first one for mech and the second for biological?

I think you could get away with one with 2 different sizes of prefilter media, lots of matrix/efhisubstrat and an AC for most of the junk removal.


...I had more to write but I forgot, maybe I will remember later.

Hey I said he could add more and eventually get an AC5000. As the number of filters approaches infinity, the rating of the filters approaches infinity x 500. Duh! LOL

 

[eh1421]

what i would do is setup your tank with overflows and a wet dry then use your canisters to return the water back to the tank

that would be a pretty cool setup

mike

 

[JustLooking]

what if you just tee the lines together ......

 

[rallysman]

My orignal thought was to keep the hoses and clutter to a minimum.......I dont know if it's going to be possible.

 

[RadleyMiller]

Hey I said he could add more and eventually get an AC5000. As the number of filters approaches infinity, the rating of the filters approaches infinity x 500. Duh! LOL

hahaha limits