330 gallon setup and sump build

  • We are currently upgrading MFK. thanks! -neo
Geeez man this is gonna be a story to tell
Your telling me bro. Thought I was gunna throw my back out yanking this thing away from the wall. Cut the old pipe off and threw on the new bulkhead and stuck a pipe in it to test it. 10 minutes dry so far. Going to leave it over night. Got a good seal on this one for sure

If this one leaks you'll see a on the news "man in jersey throws aquarium off bridge"

image.jpg
 
  • Like
Reactions: DN328 and jaws7777
J jaws7777 twentyleagues twentyleagues do you guys have a specific pad or sponge you use for cleaning the inside of acrylic? It looks like petco has a few things labeled for acrylic but I also saw on Amazon Lee sponges?
 
I honestly use a cheap foam sponge i found in my lfs
 
I use a cloth wash rag. regular old cotton wash rag. stick my hand in the tank and wipe down the inside wall.
 
For the Herbie, adding a strainer to the full siphon could be beneficial. Just cut PVC down enough to add strainer.
 
MonsterFishKeepers.com